Surfcam Traditional TrueMill
Meet the most efficient toolpath;
- toolpaths integrated with 2-axis and 3-axis integration
- reduced cycle times up to 80%
- extended tool life up to 10 times
- 5 times more metal removing rates (Titanium, Stainless
Steel, Aluminum, Tool Steels, Alloys, etc.)
TRUEMILL INTEGRATED CAD/CAM SYSTEMS
TRUEMill 2 Axis and 3 Axis Roughing Toolpaths are integrated
in the following CAM systems to deliver the Highest Material Removal Rates in
REDUCE CYCLE TIMES up to 80%
TRUEMill toolpaths are very different from all other
roughing toolpaths. All corners and sharp directional changes have been
eliminated. The tool never plows into a corner. The technology works on all
part shapes and geometry. Rather than generating toolpaths based on a given stepover
value and the shape of the geometry being machined, TRUEMill toolpaths manage
tool-engagement angles to produce toolpaths that are far superior to anything
on the market today.
EXTENDED TOOL LIFE up to 10 TIMES
The current approach to high-speed machining involves taking
very light cuts. TRUEMill enables the machine to run at high speeds with much
heavier cuts. Also, due to the even loads, there is less stress on the machine
and the cutting tool. Tool life is actually extended while cycle times are reduced.
These two concepts used to be mutually exclusive.
INCREASE MARERIAL REMOVAL RATES up to 5 times
The key to TRUEMill's high productivity is it's ability to
cut fast and deep. What might take a traditional toolpath four passes to get to
full depth will only take a single pass at full depth with TRUEMill, thus
allowing for the highest material removal rates in any material type.
Click for Surfcam Traditional Training Videos.